GECO CEMENT plaster

BREATHABLE CEMENT-BASED PLASTER WITH FIBRES AND FINE FLOATED FINISH

GECO CEMENT plaster is a pre-mixed, breathable cement-based plaster with mineral fibres and a fine floated finish, classified as a renovation mortar (EN 998-1 R). It is used to plaster damp walls and ceilings, indoors and outdoors, in one or more coats.

It goes on thick – up to 30 mm (1.18 in) per coat – without sagging or cracking: anti-sagging additives keep the surface uniform, mineral fibres improve impact resistance and controlled shrinkage limits fissures. Its capillary water absorption is class W0, and because it is vapour-permeable it lets the wall dry out.

After 1.5-2 hours it can be floated to a smooth or slightly rough finish; after 24 hours it can be painted or covered.

NOTE

High thickness per coat
Waterproof and breathable
Fibre-reinforced
Controlled shrinkage

Grey powder; maximum particle size 1.5 mm (0.059 in).
Compressive strength: CS II; adhesion: > 0.6 MPa (> 87 psi).
Capillary absorption and water permeability: W0.
Water vapour diffusion resistance factor μ: ≤ 13.
Thermal conductivity: 0.40 W/mK (2.77 BTU·in/(h·ft²·°F)) (declared value).
Reaction to fire: A1.
Thickness per coat: 5-30 mm (0.197 to 1.18 in); consumption: 1.35 kg/m² per mm of thickness (7.02 lb/ft² per inch of thickness); fresh density: 1670 ± 30 kg/m³ (104 ± 1.9 lb/ft³).
Mixing water: 4.25-4.75 L (1.1-1.3 US gal) per bag; open time: 30 minutes; application between +5 °C (41 °F) and +35 °C (95 °F).
25 kg (55 lb) bags; pallet of 60 bags; shelf life 12 months in a dry place.

PACKAGING

Plastering of damp walls and ceilings in one or more coats, indoors and outdoors.
Renovation systems (EN 998-1 R) on concrete, aerated concrete, masonry, plasters, terracotta, brick and stone.
Second coat on the hardened first one for thicknesses over 30 mm (1.18 in).
Machine application: contact the Edilteco Technical Department.

DOWNLOADS