KRONOS AUTOLIV 5-30

PRE-MIXED SELF-LEVELLING FINISHING COAT FOR LOW-PROFILE APPLICATIONS. 5-30 MM

KRONOS AUTOLIV 5-30 is the self-levelling compound for greater thicknesses, from 5 to 30 mm (0.197 to 1.18 in): it corrects larger differences in level and creates, in a single pass, a flat and very strong surface ready for any floor covering.

A mineral mortar based on Portland cement and selected quartz, it is applied by hand or by machine and reaches very high strength (C45-F7, ≥ 45 N/mm² (≥ 6,527 psi) in compression). It is ideal for levelling cement screeds and POLITERM® BLU and ISOLCAP lightweight subfloors.

It is walkable after about 24 hours; ceramic and terracotta can be laid after about 48 hours, parquet, resilient floors and natural stone after about 7 days. Below 5 mm (0.197 in) use KRONOS AUTOLIV (1-10 mm (0.039 to 0.394 in)).

NOTE

Thickness 5-30 mm (0.197 to 1.18 in); consumption 1.95 kg/m² per mm of thickness (10.14 lb/ft² per inch of thickness).
Mixing water 3.75-4.25 L (0.99-1.1 US gal) per 25 kg (55 lb) bag; pot life ≥ 30 minutes.
Application temperature +5 to +35 °C (41 to 95 °F).
Walkable after about 24 h; ceramic/terracotta after about 48 h; parquet, resilient and natural stone after about 7 days.
Compressive strength C45 (≥ 45 N/mm² (≥ 6,527 psi)); flexural strength F7 (> 7 MPa (> 1,015 psi)).
Adhesion to concrete ≥ 0.5 N/mm² (≥ 73 psi) (28 days), also after freeze/thaw cycles.
25 kg (55 lb) bag; pallet of 48 bags (1,200 kg (2,646 lb)).

PACKAGING

Levelling of cement screeds with high strength, creating a surface suitable for PVC, carpet, laminate, ceramic and epoxy or polyurethane resins.
High-strength levelling of POLITERM® BLU and ISOLCAP subfloors before laying ceramic tiles, stoneware, natural stone and wooden floors.
Mandatory skim coat for glued parquet on ISOLCAP single-layer screeds.
Not to be used as a finishing layer outdoors or for heavy traffic.

DOWNLOADS